TEDESolutions
NEO·HII Series H1080II wp - Technical Specifications
December 13, 2025
TEDESolutions sp. z o.o. | ul. Stolarska 6C, 86-021 Maksymilianowo | +48 507 161 780 | biuro@tedesolutions.pl | www.tedesolutions.pl
10,800
kN
3
Variants
57
t
NEO·HII Series H1080II wp Machine Overview
Tederic NEO·HII Series H1080II wp two-platen injection molding machine with a clamping force of 10800 kN (1080 metric tons). This is a smaller capacity machine within the NEO·HII Series series.
This model offers 3 screw diameter options (100mm, 110mm, 120mm). Shot weight (PS) ranges from 3931g to 5661g. Injection pressure from 147.8 MPa to 212.8 MPa. Injection rate from 740 g/s to 1065 g/s.
Mold opening stroke: 2000mm. Tie bar spacing: 1475×1375mm (width × height). Maximum daylight: 2600mm. Mold height range: 600mm to 1250mm.
Overall machine dimensions: 10.5×3.5×3.2 m (L×W×H). Machine weight: 57 t.
The NEO·HII Series series includes 15 models with clamping forces from 5500 kN to 45000 kN (550-4500 metric tons). A total of 89 injection unit configurations are available in this series.
Ideal for large automotive parts, industrial packaging, and construction components molding.
Clamping Unit: H1080II wp
Clamping Force
10,800 kN
Mold Opening Stroke
2,000 mm
Max Mold Height
1,250 mm
Min Mold Height
600 mm
Tie Bar Spacing
1475 × 1375 mm
Platen Dimensions (W×H)
1980 × 1880 mm
Min. Mold Dimensions
1035 × 965 mm
Max Daylight
2,600 mm
Ejector Stroke
350 mm
Ejector Force
260 kN
Ejector Pins
13
Machine Weight
57.0 t
Overall Dimensions (L×W×H)
10.5 × 3.5 × 3.2 m
Injection Unit: i9500
Standard / High Power
Max Injection Speed
104 mm/s
Injection Stroke
550 mm
Screw Speed
112 rpm
Max Pump Pressure
17.5 MPa
Pump Motor Power
40x2+40 kW
Heater Power
63 / 78 kW
Hopper Capacity
100 kg
Oil Tank Volume
1,100 L
Variants (3)
Injection Unit: i9500
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 100 mm | 110 mm | 120 mm |
| L/D Ratio | 24.2 | 22 | 20.2 |
| Shot Volume | 4,320 cm³ | 5,227 cm³ | 6,220 cm³ |
| Shot Weight (PS) | 3,931 g | 4,756 g | 5,661 g |
| Injection Pressure | 213 MPa | 176 MPa | 148 MPa |
| Injection Rate | 740 g/s | 895 g/s | 1065 g/s |
Equipment & Options
Standard
Optional
—Not Available
Platen with tapped holes
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
High rigid two-platen clamping unit
Standard
Mechanical safety
Standard
Electrical safety
Standard
Hydraulic safety
Standard
Auto-mold height adjustment function
Standard
Mold open, closing and mold adjusting controlled by transducer
Standard
Fix-quantity type auto central lubrication system
Standard
Mechanical adjust support for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
Auto safety door
Standard
EUROMAP 18 robot interface
Standard
Magnetic platen
Optional
Hydraulic/electrical unscrew device
Optional
Widened door and covers
Standard
Safety pressure plate under mold area
Standard
Two water regulation manifolds
Standard
Quick coupling for water regulator
Standard
Two air blow circuits
Standard
Four air blow circuits
Optional
Glass water flow regulators
Standard
Self-lock valve for locking
Standard
Buffer lock brake control
Standard
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Standard
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Closed-loop control of the temperature at the discharge port
Standard
Barrel insulation cover
Standard
Nozzle cover
Standard
Self-lock valve for carriage
Standard
Material loading platform
Optional
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Optional
Stainless heater bands
Optional
Ceramic heating band
Standard
Screw mobile feed hopper
Standard
Gas-assisted injection interface
Optional
Foam moulding
Optional
Hopper dryer
Standard
Stainless hopper
Standard
Barrel insulation device
Optional
Equipment & Options
Standard
Optional
—Not Available
Clamping Unit(25)
Platen with tapped holes
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
High rigid two-platen clamping unit
Standard
Mechanical safety
Standard
Electrical safety
Standard
Hydraulic safety
Standard
Auto-mold height adjustment function
Standard
Mold open, closing and mold adjusting controlled by transducer
Standard
Fix-quantity type auto central lubrication system
Standard
Mechanical adjust support for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
Auto safety door
Standard
EUROMAP 18 robot interface
Standard
Magnetic platen
Optional
Hydraulic/electrical unscrew device
Optional
Widened door and covers
Standard
Safety pressure plate under mold area
Standard
Two water regulation manifolds
Standard
Quick coupling for water regulator
Standard
Two air blow circuits
Standard
Four air blow circuits
Optional
Glass water flow regulators
Standard
Self-lock valve for locking
Standard
Buffer lock brake control
Standard
Injection Unit(25)
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Standard
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Closed-loop control of the temperature at the discharge port
Standard
Barrel insulation cover
Standard
Nozzle cover
Standard
Self-lock valve for carriage
Standard
Material loading platform
Optional
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Optional
Stainless heater bands
Optional
Ceramic heating band
Standard
Screw mobile feed hopper
Standard
Gas-assisted injection interface
Optional
Foam moulding
Optional
Hopper dryer
Standard
Stainless hopper
Standard
Barrel insulation device
Optional
Electrical System(31)
KEBA controller
Standard
KEBA 15-inch touch screen
Standard
Memory with 200 sets of mold parameters
Standard
All action instant monitoring
Standard
Production monitoring
Standard
Failure alarm display
Standard
Changeover from injection fill to hold by injection pressure
Optional
I/O monitoring display
Standard
3 color light (with buzzer)
Standard
Motor overload protection
Standard
Front/back door emergency stop switch
Standard
5 pins socket of 380V/32A, 2 groups
Standard
5 pins socket of 380V/16A, 1 group
Optional
3 pins socket of 230V/16A, 1 group
Standard
Transformer for servomotor system
Optional
EUROMAP 13 neutron connection
Standard
EUROMAP 12 robot interface
Standard
EUROMAP 67 robot interface
Optional
Double protection for heating
Standard
Safety relay monitoring
Standard
SSR heating control
Optional
Hot runner control system & interface
Optional
Instant power consumption monitoring
Optional
Instant clamping force monitoring
Standard
230V/10A Industrial plug
Standard
Electrical cabinet lighting device
Optional
Remote control
Standard
Close-loop control for mold open/close
Standard
Safety pedal monitoring
Standard
Open-phase protection
Standard
Inspection of repair door
Standard
Hydraulic System(27)
Fast response servo system
Standard
Increased motor-pump unit
Optional
Independent cooling system
Standard
Independent filtration system
Optional
Pressure control for injection to hold on pressure
Optional
Programmable injection sequence
Optional
Fast injection with accumulator
Standard
Carriage self-lock valve
Optional
Proportional injection valve
Optional
Injection servo valve
Optional
Oil temp. detector
Standard
Oil level alarm
Standard
Anti-explosive chain
Standard
Self-lock suction oil filter
Optional
Control of oil temperature and cold water valve
Standard
Two core pull circuits on moving platen
Standard
Two core pull circuit on moving platen, two core pull circuit on fixed
Optional
Sequence valve
Optional
Fast molding closing device
Standard
Quick clamping device
Standard
Ejector on-the-fly
Standard
Low pressure mold protection
Standard
Hydraulic safety device
Standard
Plasticize on-the-fly
Optional
Plasticizing & ejector on the fly
Optional
Proportional valve control for clamp open and close
Standard
Servo valve control for clamp open and close
Optional
Other Equipment(14)
Standard tederic color
Standard
Shock-proof pad
Standard
Foundation steel plate, Foundation anchor bolts
Optional
Spare parts, regular tools, mold clamper, extended nozzle, operation manual
Standard
High base
Optional
Robot
Optional
Magnet (for hopper dryer)
Optional
Chiller
Optional
Mould temp controller
Optional
Dehumidifier
Optional
Autoloader
Optional
Fumigated wooden packaging
Optional
With full-tank hydraulic oil
Optional
Products fetching platform
Optional
Similar Machines by Clamping Force
Other Tederic models with clamping force around 10800 kN from different series.
NEO·EII Series
E1080II
10800 kN(1080t)
All-Electric
9 screw variants
DE-C SeriesDE1088
10880 kN(1088t)
All-Electric
9 screw variants
DT SeriesD1050
10500 kN(1050t)
Toggle Clamp
3 screw variants
NEO·T SeriesT1050
10500 kN(1050t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read moreInjection Molds & Precision Molding
Mold design principles and precision molding techniques for high-quality parts.
Read more