NEO T lite Series T160 - Technical Specifications
NEO T lite Series T160 Machine Overview
Tederic NEO T lite Series T160 toggle clamp injection molding machine with a clamping force of 1600 kN (160 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (42mm, 45mm, 50mm). Shot weight (PS) ranges from 284g to 402g. Injection pressure from 157.7 MPa to 223.5 MPa. Injection rate from 135 g/s to 192 g/s.
Mold opening stroke: 450mm. Tie bar spacing: 470×470mm (width × height). Maximum daylight: 980mm. Mold height range: 180mm to 530mm.
Overall machine dimensions: 4.79×1.18×1.72 m (L×W×H). Machine weight: 5.3 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: T160
Injection Unit: i600
Variants (3)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 42 mm | 45 mm | 50 mm |
| L/D Ratio | 21.4 | 20 | 18 |
| Shot Volume | 312 cm³ | 358 cm³ | 442 cm³ |
| Shot Weight (PS) | 284 g | 326 g | 402 g |
| Injection Pressure | 224 MPa | 195 MPa | 158 MPa |
| Injection Rate | 135 g/s | 155 g/s | 192 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1600 kN from different series.
D160
1600 kN(160t)
Toggle Clamp
3 screw variants
NEO·T SeriesT160
1600 kN(160t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE160II
1600 kN(160t)
All-Electric
18 screw variants
DE-C SeriesDE168
1680 kN(168t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more