NEO T lite Series T530 - Technical Specifications
NEO T lite Series T530 Machine Overview
Tederic NEO T lite Series T530 toggle clamp injection molding machine with a clamping force of 5300 kN (530 metric tons). This is a mid-range capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (80mm, 85mm, 90mm). Shot weight (PS) ranges from 2040g to 2582g. Injection pressure from 161.5 MPa to 204.4 MPa. Injection rate from 454 g/s to 575 g/s.
Mold opening stroke: 850mm. Tie bar spacing: 840×830mm (width × height). Maximum daylight: 1700mm. Mold height range: 350mm to 850mm.
Overall machine dimensions: 9.1×2.04×2.71 m (L×W×H). Machine weight: 22 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: T530
Injection Unit: i4800
Variants (3)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 80 mm | 85 mm | 90 mm |
| L/D Ratio | 23.4 | 22 | 20.8 |
| Shot Volume | 2,242 cm³ | 2,531 cm³ | 2,837 cm³ |
| Shot Weight (PS) | 2,040 g | 2,303 g | 2,582 g |
| Injection Pressure | 204 MPa | 181 MPa | 162 MPa |
| Injection Rate | 454 g/s | 513 g/s | 575 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 5300 kN from different series.
H550II
5500 kN(550t)
Two-Platen
3 screw variants
DT SeriesD500
5000 kN(500t)
Toggle Clamp
3 screw variants
NEO·T SeriesT500
5000 kN(500t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE560II
5600 kN(560t)
All-Electric
18 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more