TEDESolutions
NEO·T Series T200 - Technical Specifications
December 13, 2025
TEDESolutions sp. z o.o. | ul. Stolarska 6C, 86-021 Maksymilianowo | +48 507 161 780 | biuro@tedesolutions.pl | www.tedesolutions.pl
2,000
kN
3
Variants
7.2
t
NEO·T Series T200 Machine Overview
Tederic NEO·T Series T200 toggle clamp injection molding machine with a clamping force of 2000 kN (200 metric tons). This is a smaller capacity machine within the NEO·T Series series.
This model offers 3 screw diameter options (45mm, 50mm, 55mm). Shot weight (PS) ranges from 340g to 508g. Injection pressure from 153.9 MPa to 229.9 MPa. Injection rate from 165 g/s to 246 g/s.
Mold opening stroke: 510mm. Tie bar spacing: 530×530mm (width × height). Maximum daylight: 1070mm. Mold height range: 200mm to 560mm.
Overall machine dimensions: 5.26×1.68×2.17 m (L×W×H). Machine weight: 7.2 t.
The NEO·T Series series includes 12 models with clamping forces from 900 kN to 10500 kN (90-1050 metric tons). A total of 36 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: T200
Clamping Force
2,000 kN
Mold Opening Stroke
510 mm
Max Mold Height
560 mm
Min Mold Height
200 mm
Tie Bar Spacing
530 × 530 mm
Platen Dimensions (W×H)
800 × 800 mm
Min. Mold Dimensions
371 × 371 mm
Max Daylight
1,070 mm
Ejector Stroke
150 mm
Ejector Force
67 kN
Ejector Pins
9
Machine Weight
7.2 t
Overall Dimensions (L×W×H)
5.26 × 1.68 × 2.17 m
Injection Unit: i850
Max Injection Speed
114 mm/s
Injection Stroke
235 mm
Screw Speed
230 rpm
Max Pump Pressure
17.5 MPa
Pump Motor Power
25 kW
Heater Power
13 kW
Hopper Capacity
50 kg
Oil Tank Volume
210 L
Variants (3)
Injection Unit: i850
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 45 mm | 50 mm | 55 mm |
| L/D Ratio | 22.2 | 20 | 18.2 |
| Shot Volume | 374 cm³ | 461 cm³ | 558 cm³ |
| Shot Weight (PS) | 340 g | 420 g | 508 g |
| Injection Pressure | 230 MPa | 186 MPa | 154 MPa |
| Injection Rate | 165 g/s | 204 g/s | 246 g/s |
Equipment & Options
Standard
Optional
—Not Available
High rigidity 5 points-double toggle structure
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
Locating ring on moving platen
Standard
Mechanical safety
Standard
Electrical safety
Standard
Hydraulic safety
Standard
Fix-quantity type auto central lubrication system
Standard
Low pressure mold protection
Standard
One button automatic mold adjustment
Standard
Self-lock mold adjust motor
Standard
Compulsory ejector-back function
Standard
Quick change of central eject pin
Standard
Transducer on moving platen
Standard
Adjustable supporting feet for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
EUROMAP 18 robot interface
Standard
Mechanical position limitation for moving platen
Optional
Fast connecting water regulator
Standard
2 groups of core pulling valve
Standard
2 groups of air blaster valve
Standard
Glass water flow regulators
Optional
Proportional mold open/close valve
Optional
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Optional
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Double stage linear guide injection structure
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Proportional injection valve
Optional
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Cold start protection
Standard
Material self-cleaning function
Standard
Temperature monitor for feeding throat
Optional
Feeding throat temperature close loop control
Optional
Barrel overheating protection
Standard
Nozzle cover
Standard
Self-lock valve for carriage
—Not Available
Barrel supporting device
Standard
Swivel injection unit
—Not Available
Material loading platform
Optional
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Optional
Mica heating band
Standard
Ceramic heating band
Optional
Nano infrared heating band
Optional
Wheel sliding hopper
Standard
Stainless hopper
Standard
Equipment & Options
Standard
Optional
—Not Available
Clamping Unit(23)
High rigidity 5 points-double toggle structure
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
Locating ring on moving platen
Standard
Mechanical safety
Standard
Electrical safety
Standard
Hydraulic safety
Standard
Fix-quantity type auto central lubrication system
Standard
Low pressure mold protection
Standard
One button automatic mold adjustment
Standard
Self-lock mold adjust motor
Standard
Compulsory ejector-back function
Standard
Quick change of central eject pin
Standard
Transducer on moving platen
Standard
Adjustable supporting feet for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
EUROMAP 18 robot interface
Standard
Mechanical position limitation for moving platen
Optional
Fast connecting water regulator
Standard
2 groups of core pulling valve
Standard
2 groups of air blaster valve
Standard
Glass water flow regulators
Optional
Proportional mold open/close valve
Optional
Injection Unit(29)
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Optional
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Double stage linear guide injection structure
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Proportional injection valve
Optional
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Cold start protection
Standard
Material self-cleaning function
Standard
Temperature monitor for feeding throat
Optional
Feeding throat temperature close loop control
Optional
Barrel overheating protection
Standard
Nozzle cover
Standard
Self-lock valve for carriage
—Not Available
Barrel supporting device
Standard
Swivel injection unit
—Not Available
Material loading platform
Optional
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Optional
Mica heating band
Standard
Ceramic heating band
Optional
Nano infrared heating band
Optional
Wheel sliding hopper
Standard
Stainless hopper
Standard
Electrical System(22)
Techmation controller
Standard
KEBA controller
Optional
All action instant monitoring
Standard
Production monitoring
Standard
Failure alarm display
Standard
Changeover from injection fill to hold by injection pressure
Standard
I/O monitoring display
Standard
3 color light (with buzzer)
Standard
Motor overload protection
Standard
Front/back door emergency stop switch
Standard
5 pins socket of 380V/16A, 1 group
Standard
3 pins socket of 230V/16A, 1 group
Standard
Transformer for servomotor system
Optional
EUROMAP 12 robot interface
Optional
EUROMAP 67 robot interface
Optional
EUROMAP 13 neutron connection
Optional
Double protection for heating
Standard
Safety relay monitoring
Standard
SSR heating control
Standard
Network centralized control system
Optional
Instant power consumption monitoring
Optional
Instant clamping force monitoring
Optional
Hydraulic System(20)
Fast response servo system
Standard
Increased motor-pump unit
Optional
Bi-pass oil filter
Standard
Hydraulic safety device
Standard
Carriage self-lock valve
Standard
Self-lock mold adjust motor
Standard
Mold open shock mitigation
Standard
Injections respond quickly
Standard
Programmable injection sequence
Optional
Cooling water valve
Optional
Non-welding hydraulic pipe
Standard
Temperature monitoring
Standard
Oil level alarm
Standard
Self-lock suction oil filter
Standard
Protective link for hoses
Standard
Proportional injection valve
Standard
Injection servo valve
Optional
Proportional mold open/close valve
Standard
2 groups of core pulling valve
Standard
2 groups of air blaster valve
Standard
Other Equipment(12)
Standard tederic color
Standard
Leveling pad
Standard
Spare parts, regular tools, mold clamper, extended nozzle, operation manual
Standard
Robot
Standard
Magnetic grate
Optional
Chiller
Optional
Mould temp controller
Optional
Dehumidifier
Optional
Autoloader
Optional
Fumigated wooden packaging
Optional
With full-tank hydraulic oil
Optional
Products fetching platform
—Not Available
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2000 kN from different series.
DT Series
D200
2000 kN(200t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE200II
2000 kN(200t)
All-Electric
18 screw variants
NEO T lite SeriesT200
2000 kN(200t)
Toggle Clamp
3 screw variants
DE-C SeriesDE208
2080 kN(208t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more