What screw diameter options are available for the Tederic NEO·T T600?

The Tederic T600 offers 3 screw diameter options: 80mm, 85mm, 90mm. Each diameter provides different shot volumes and weights, allowing you to match the machine to specific production requirements.

What is the maximum shot weight of the T600?

The maximum shot weight of the T600 is 2582g (polystyrene) with the 90mm screw. The shot weight range across all variants is 2040g to 2582g.

What is the injection pressure of the T600?

The T600 injection pressure ranges from 161.5 MPa to 204.4 MPa, depending on the selected screw diameter. Smaller screw diameters provide higher injection pressure.

What are the dimensions and weight of the T600?

The overall dimensions of the T600 are 9.2×2.15×2.8 m, with a machine weight of 24 t. The clamping force is 6000 kN.

What is the tie bar spacing of the T600?

The tie bar spacing of the T600 is 880×880 mm (width × height), which determines the maximum mold dimensions that can be mounted on the machine.

NEO·T SeriesToggle ClampView Machine Details

T600

Toggle Clamp Injection Molding Machine

6,000

Variants

Back to Models

Clamping Unit: T600

Clamping Force

6,000 kN

Mold Opening Stroke

900 mm

Max Mold Height

900 mm

Min Mold Height

350 mm

Tie Bar Spacing

880 × 880 mm

Platen Dimensions (W×H)

1285 × 1285 mm

Min. Mold Dimensions

616 × 616 mm

Max Daylight

1,800 mm

Ejector Stroke

260 mm

Ejector Force

182 kN

Ejector Pins

Machine Weight

24.0 t

Overall Dimensions (L×W×H)

9.2 × 2.15 × 2.8 m

Injection Unit: i4800

Max Injection Speed

109 mm/s

Injection Stroke

446 mm

Screw Speed

150 rpm

Max Pump Pressure

17.5 MPa

Pump Motor Power

40+32 kW

Heater Power

39 kW

Hopper Capacity

100 kg

Oil Tank Volume

710 L

Variants (3)

Injection Unit: i4800

Parameter	Variant A	Variant B	Variant C
Screw Diameter	80 mm	85 mm	90 mm
L/D Ratio	23.4	22	20.8
Shot Volume	2,242 cm³	2,531 cm³	2,837 cm³
Shot Weight (PS)	2,040 g	2,303 g	2,582 g
Injection Pressure	204 MPa	181 MPa	162 MPa
Injection Rate	499 g/s	563 g/s	631 g/s

Equipment & Options

Standard

Optional

—Not Available

High rigidity 5 points-double toggle structure

Platen with T slots

Platen (according to EUROMAP 2)

Locating ring on moving platen

Mechanical safety

Electrical safety

Hydraulic safety

Fix-quantity type auto central lubrication system

Low pressure mold protection

One button automatic mold adjustment

Self-lock mold adjust motor

Compulsory ejector-back function

Quick change of central eject pin

Transducer on moving platen

Adjustable supporting feet for moving platen

High rigidity steel wear strips for moving platen

EUROMAP 18 robot interface

Mechanical position limitation for moving platen

Fast connecting water regulator

2 groups of core pulling valve

2 groups of air blaster valve

Glass water flow regulators

Proportional mold open/close valve

Standard screw

Specialized screw and barrel

Shut off nozzle

Double cylinder injection

Double carriage cylinder injection unit

Double stage linear guide injection structure

Carriage transducer

Screw rotation speed display

Proportional injection valve

Hydraulic plasticizing

Electrical plasticizing

Proportional back pressure control

Cold start protection

Material self-cleaning function

Temperature monitor for feeding throat

Feeding throat temperature close loop control

Barrel overheating protection

Nozzle cover

Self-lock valve for carriage

Barrel supporting device

Swivel injection unit

Material loading platform

Manual central lubricating device for carriage

Carriage central auto lubrication device

Mica heating band

Ceramic heating band

Nano infrared heating band

Wheel sliding hopper

Stainless hopper

Equipment & Options

Standard

Optional

—Not Available

Clamping Unit(23)

High rigidity 5 points-double toggle structure

Platen with T slots

Platen (according to EUROMAP 2)

Locating ring on moving platen

Mechanical safety

Electrical safety

Hydraulic safety

Fix-quantity type auto central lubrication system

Low pressure mold protection

One button automatic mold adjustment

Self-lock mold adjust motor

Compulsory ejector-back function

Quick change of central eject pin

Transducer on moving platen

Adjustable supporting feet for moving platen

High rigidity steel wear strips for moving platen

EUROMAP 18 robot interface

Mechanical position limitation for moving platen

Fast connecting water regulator

2 groups of core pulling valve

2 groups of air blaster valve

Glass water flow regulators

Proportional mold open/close valve

Injection Unit(29)

Standard screw

Specialized screw and barrel

Shut off nozzle

Double cylinder injection

Double carriage cylinder injection unit

Double stage linear guide injection structure

Carriage transducer

Screw rotation speed display

Proportional injection valve

Hydraulic plasticizing

Electrical plasticizing

Proportional back pressure control

Cold start protection

Material self-cleaning function

Temperature monitor for feeding throat

Feeding throat temperature close loop control

Barrel overheating protection

Nozzle cover

Self-lock valve for carriage

Barrel supporting device

Swivel injection unit

Material loading platform

Manual central lubricating device for carriage

Carriage central auto lubrication device

Mica heating band

Ceramic heating band

Nano infrared heating band

Wheel sliding hopper

Stainless hopper

Electrical System(22)

Techmation controller

KEBA controller

All action instant monitoring

Production monitoring

Failure alarm display

Changeover from injection fill to hold by injection pressure

I/O monitoring display

3 color light (with buzzer)

Motor overload protection

Front/back door emergency stop switch

5 pins socket of 380V/16A, 1 group

3 pins socket of 230V/16A, 1 group

Transformer for servomotor system

EUROMAP 12 robot interface

EUROMAP 67 robot interface

EUROMAP 13 neutron connection

Double protection for heating

Safety relay monitoring

SSR heating control

Network centralized control system

Instant power consumption monitoring

Instant clamping force monitoring

Hydraulic System(20)

Fast response servo system

Increased motor-pump unit

Bi-pass oil filter

Hydraulic safety device

Carriage self-lock valve

Self-lock mold adjust motor

Mold open shock mitigation

Injections respond quickly

Programmable injection sequence

Cooling water valve

Non-welding hydraulic pipe

Temperature monitoring

Oil level alarm

Self-lock suction oil filter

Protective link for hoses

Proportional injection valve

Injection servo valve

Proportional mold open/close valve

2 groups of core pulling valve

2 groups of air blaster valve

Other Equipment(12)

Standard tederic color

Leveling pad

Spare parts, regular tools, mold clamper, extended nozzle, operation manual

Robot

Magnetic grate

Chiller

Mould temp controller

Dehumidifier

Autoloader

Fumigated wooden packaging

With full-tank hydraulic oil

Products fetching platform

Similar Machines by Clamping Force

Other Tederic models with clamping force around 6000 kN from different series.

DT Series

D600

6000 kN(600t)

Toggle Clamp

3 screw variants

NEO T lite Series

T600

6000 kN(600t)

Toggle Clamp

3 screw variants

J type Series

DT600/JI24000

6000 kN(600t)

Hydraulic

1 screw variants

J type Series

DT600/JI24000

6000 kN(600t)

Hydraulic

1 screw variants

Compare machines from different series to find the best fit for your needs.

Learn more about injection molding technology and best practices.

NEO·T Series T600 - Technical Specifications

T600

Clamping Unit: T600

Injection Unit: i4800

Variants (3)

Equipment & Options

Equipment & Options

Similar Machines by Clamping Force

D600

T600

DT600/JI24000

DT600/JI24000

Related Articles

Complete Guide to Injection Molding Machines

Production Cycle Optimization

Injection Molding Defects: Identification & Solutions

T600

NEO·T Series T600 Machine Overview

Clamping Unit: T600

Injection Unit: i4800

Variants (3)

Equipment & Options

Clamping Unit(23)

Injection Unit(29)

Electrical System(22)

Hydraulic System(20)

Other Equipment(12)

Equipment & Options

Similar Machines by Clamping Force

D600

T600

DT600/JI24000

DT600/JI24000

Related Articles

Complete Guide to Injection Molding Machines

Production Cycle Optimization

Injection Molding Defects: Identification & Solutions