DT Series D350 - 技术规格
DT Series D350 机器概述
Tederic DT Series D350 肘杆式 注塑机 锁模力为 3500 kN (350 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (60mm, 65mm, 70mm). Shot weight (PS) ranges from 769g to 1047g. Injection pressure from 166 MPa to 226 MPa. Injection rate from 245 g/s to 334 g/s.
Mold opening stroke: 690mm. Tie bar spacing: 710×670mm (width × height). Maximum daylight: 1390mm. Mold height range: 280mm to 700mm.
Overall machine dimensions: 6.72×1.88×2.36 m (L×W×H). Machine weight: 11.7 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D350
注射单元: i1900
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 60 mm | 65 mm | 70 mm |
| 长径比 | 21.7 | 20 | 18.6 |
| 射胶容量 | 845 cm³ | 992 cm³ | 1,151 cm³ |
| 射胶重量 (PS) | 769 g | 903 g | 1,047 g |
| 注射压力 | 226 MPa | 193 MPa | 166 MPa |
| 注射速率(标准 / 高功率) | 245 / 284 g/s | 288 / 334 g/s | 334 / 387 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 3500 kN from different series.
T360
3600 kN(360t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT360
3600 kN(360t)
Toggle Clamp
3 screw variants
DE SeriesDE360
3600 kN(360t)
All-Electric
6 screw variants
DE-C SeriesDE328
3280 kN(328t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more