DT Series D600 - 技术规格
DT Series D600 机器概述
Tederic DT Series D600 肘杆式 注塑机 锁模力为 6000 kN (600 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (80mm, 85mm, 90mm). Shot weight (PS) ranges from 2040g to 2582g. Injection pressure from 174.1 MPa to 220.4 MPa. Injection rate from 382 g/s to 484 g/s.
Mold opening stroke: 900mm. Tie bar spacing: 880×880mm (width × height). Maximum daylight: 1800mm. Mold height range: 400mm to 900mm.
Overall machine dimensions: 9.61×2.02×2.77 m (L×W×H). Machine weight: 23.3 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D600
注射单元: i4800
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 80 mm | 85 mm | 90 mm |
| 长径比 | 23.4 | 22 | 20.8 |
| 射胶容量 | 2,242 cm³ | 2,531 cm³ | 2,837 cm³ |
| 射胶重量 (PS) | 2,040 g | 2,303 g | 2,582 g |
| 注射压力 | 220 MPa | 195 MPa | 174 MPa |
| 注射速率(标准 / 高功率) | 382 / 462 g/s | 431 / 522 g/s | 484 / 585 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 6000 kN from different series.
T600
6000 kN(600t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT600
6000 kN(600t)
Toggle Clamp
3 screw variants
J type SeriesDT600/JI24000
6000 kN(600t)
Hydraulic
1 screw variants
J type SeriesDT600/JI24000
6000 kN(600t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more