DT Series D800 - 技术规格
DT Series D800 机器概述
Tederic DT Series D800 肘杆式 注塑机 锁模力为 8000 kN (800 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (90mm, 100mm, 110mm). Shot weight (PS) ranges from 2981g to 4454g. Injection pressure from 154.7 MPa to 231.1 MPa. Injection rate from 513 g/s to 766 g/s.
Mold opening stroke: 1050mm. Tie bar spacing: 1020×1020mm (width × height). Maximum daylight: 2070mm. Mold height range: 450mm to 1020mm.
Overall machine dimensions: 10.77×2.22×2.89 m (L×W×H). Machine weight: 35 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D800
注射单元: i7500
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 90 mm | 100 mm | 110 mm |
| 长径比 | 24.4 | 22 | 20 |
| 射胶容量 | 3,276 cm³ | 4,045 cm³ | 4,894 cm³ |
| 射胶重量 (PS) | 2,981 g | 3,681 g | 4,454 g |
| 注射压力 | 231 MPa | 187 MPa | 155 MPa |
| 注射速率(标准 / 高功率) | 513 / 633 g/s | 633 / 781 g/s | 766 / 945 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 8000 kN from different series.
T800
8000 kN(800t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT800
8000 kN(800t)
Toggle Clamp
3 screw variants
DE SeriesDE800
8000 kN(800t)
All-Electric
1 screw variants
J type SeriesDT800/JI24000
8000 kN(800t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more