NEO·EII Series E60II - 技术规格
NEO·EII Series E60II 机器概述
Tederic NEO·EII Series E60II 全电动伺服驱动 注塑机 锁模力为 600 kN (60 metric tons). This is a smaller capacity machine within the NEO·EII Series series.
This model offers 12 screw diameter options (20mm, 20mm, 22mm, 22mm, 22mm, 22mm, 25mm, 25mm, 25mm, 25mm, 28mm, 28mm). Shot weight (PS) ranges from 27g to 59g. Injection pressure from 170 MPa to 284 MPa. Injection rate from 114 g/s to 224 g/s.
Mold opening stroke: 270mm. Tie bar spacing: 360×320mm (width × height). Maximum daylight: 650mm. Mold height range: 150mm to 380mm.
Overall machine dimensions: 4.3×1.3×1.9 m (L×W×H). Machine weight: 3.6 t.
The NEO·EII Series series includes 14 models with clamping forces from 600 kN to 14000 kN (60-1400 metric tons). A total of 210 injection unit configurations are available in this series.
非常适合 需要最高洁净度的精密医疗、电子和光学组件成型.
合模单元: E60II
注射单元: e80/e80h/e110/e110h (h = 高速)
变体 (12)
注射单元: e80
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 20 mm | 22 mm | 25 mm |
| 长径比 | 22 | 20 | 17.6 |
| 射胶容量 | 30 cm³ | 36 cm³ | 46 cm³ |
| 射胶重量 (PS) | 27 g | 33 g | 42 g |
| 注射压力 | 266 MPa | 220 MPa | 170 MPa |
| 保压压力 | 213 MPa | 176 MPa | 136 MPa |
| 注射速率 | — | — | — |
注射单元: e80h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 20 mm | 22 mm | 25 mm |
| 长径比 | 22 | 20 | 17.6 |
| 射胶容量 | 30 cm³ | 36 cm³ | 46 cm³ |
| 射胶重量 (PS) | 27 g | 33 g | 42 g |
| 注射压力 | 266 MPa | 220 MPa | 170 MPa |
| 保压压力 | 213 MPa | 176 MPa | 136 MPa |
| 注射速率 | 114 g/s | 138 g/s | 179 g/s |
注射单元: e110
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 22 mm | 25 mm | 28 mm |
| 长径比 | 22.7 | 20 | 17.9 |
| 射胶容量 | 40 cm³ | 52 cm³ | 65 cm³ |
| 射胶重量 (PS) | 36 g | 47 g | 59 g |
| 注射压力 | 284 MPa | 220 MPa | 175 MPa |
| 保压压力 | 227 MPa | 176 MPa | 140 MPa |
| 注射速率 | — | — | — |
注射单元: e110h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 22 mm | 25 mm | 28 mm |
| 长径比 | 22.7 | 20 | 17.9 |
| 射胶容量 | 40 cm³ | 52 cm³ | 65 cm³ |
| 射胶重量 (PS) | 36 g | 47 g | 59 g |
| 注射压力 | 284 MPa | 220 MPa | 175 MPa |
| 保压压力 | 227 MPa | 176 MPa | 140 MPa |
| 注射速率 | 138 g/s | 179 g/s | 224 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 600 kN from different series.
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more