NEO·EII Series E90II - 技术规格
NEO·EII Series E90II 机器概述
Tederic NEO·EII Series E90II 全电动伺服驱动 注塑机 锁模力为 900 kN (90 metric tons). This is a smaller capacity machine within the NEO·EII Series series.
This model offers 18 screw diameter options (22mm, 22mm, 25mm, 25mm, 25mm, 25mm, 28mm, 28mm, 28mm, 28mm, 28mm, 28mm, 32mm, 32mm, 32mm, 32mm, 35mm, 35mm). Shot weight (PS) ranges from 36g to 118g. Injection pressure from 167 MPa to 284 MPa. Injection rate from 80 g/s to 350 g/s.
Mold opening stroke: 320mm. Tie bar spacing: 420×360mm (width × height). Maximum daylight: 730mm. Mold height range: 150mm to 410mm.
Overall machine dimensions: 4.5×1.4×1.9 m (L×W×H). Machine weight: 4.1 t.
The NEO·EII Series series includes 14 models with clamping forces from 600 kN to 14000 kN (60-1400 metric tons). A total of 210 injection unit configurations are available in this series.
非常适合 需要最高洁净度的精密医疗、电子和光学组件成型.
合模单元: E90II
注射单元: e110/e110h/e160/e160h/e220/e220h (h = 高速)
变体 (18)
注射单元: e110
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 22 mm | 25 mm | 28 mm |
| 长径比 | 22.7 | 20 | 17.9 |
| 射胶容量 | 40 cm³ | 52 cm³ | 65 cm³ |
| 射胶重量 (PS) | 36 g | 47 g | 59 g |
| 注射压力 | 284 MPa | 220 MPa | 175 MPa |
| 保压压力 | 227 MPa | 176 MPa | 140 MPa |
| 注射速率 | — | — | — |
注射单元: e110h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 22 mm | 25 mm | 28 mm |
| 长径比 | 22.7 | 20 | 17.9 |
| 射胶容量 | 40 cm³ | 52 cm³ | 65 cm³ |
| 射胶重量 (PS) | 36 g | 47 g | 59 g |
| 注射压力 | 284 MPa | 220 MPa | 175 MPa |
| 保压压力 | 227 MPa | 176 MPa | 140 MPa |
| 注射速率 | 138 g/s | 179 g/s | 224 g/s |
注射单元: e160
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 25 mm | 28 mm | 32 mm |
| 长径比 | 22.4 | 20 | 17.5 |
| 射胶容量 | 59 cm³ | 74 cm³ | 97 cm³ |
| 射胶重量 (PS) | 54 g | 67 g | 88 g |
| 注射压力 | 276 MPa | 220 MPa | 168 MPa |
| 保压压力 | 221 MPa | 176 MPa | 135 MPa |
| 注射速率 | 80 g/s | 112 g/s | 147 g/s |
注射单元: e160h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 25 mm | 28 mm | 32 mm |
| 长径比 | 22.4 | 20 | 17.5 |
| 射胶容量 | 59 cm³ | 74 cm³ | 97 cm³ |
| 射胶重量 (PS) | 54 g | 67 g | 88 g |
| 注射压力 | 276 MPa | 220 MPa | 168 MPa |
| 保压压力 | 221 MPa | 176 MPa | 135 MPa |
| 注射速率 | 179 g/s | 224 g/s | 293 g/s |
注射单元: e220
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 28 mm | 32 mm | 35 mm |
| 长径比 | 23 | 20 | 18.3 |
| 射胶容量 | 83 cm³ | 109 cm³ | 130 cm³ |
| 射胶重量 (PS) | 76 g | 99 g | 118 g |
| 注射压力 | 261 MPa | 200 MPa | 167 MPa |
| 保压压力 | 209 MPa | 160 MPa | 134 MPa |
| 注射速率 | 112 g/s | 147 g/s | 175 g/s |
注射单元: e220h (h = 高速)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 28 mm | 32 mm | 35 mm |
| 长径比 | 23 | 20 | 18.3 |
| 射胶容量 | 83 cm³ | 109 cm³ | 130 cm³ |
| 射胶重量 (PS) | 76 g | 99 g | 118 g |
| 注射压力 | 261 MPa | 200 MPa | 167 MPa |
| 保压压力 | 209 MPa | 160 MPa | 134 MPa |
| 注射速率 | 224 g/s | 293 g/s | 350 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 900 kN from different series.
T90
900 kN(90t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT90
900 kN(90t)
Toggle Clamp
3 screw variants
DE SeriesDE85
850 kN(85t)
All-Electric
6 screw variants
DT SeriesD100
1000 kN(100t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more