NEO T lite Series T300 - 技术规格
NEO T lite Series T300 机器概述
Tederic NEO T lite Series T300 肘杆式 注塑机 锁模力为 3000 kN (300 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (55mm, 60mm, 65mm). Shot weight (PS) ranges from 597g to 833g. Injection pressure from 158.4 MPa to 221.3 MPa. Injection rate from 210 g/s to 293 g/s.
Mold opening stroke: 640mm. Tie bar spacing: 660×620mm (width × height). Maximum daylight: 1320mm. Mold height range: 250mm to 680mm.
Overall machine dimensions: 5.9×1.8×2.25 m (L×W×H). Machine weight: 10 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T300
注射单元: i1500
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 55 mm | 60 mm | 65 mm |
| 长径比 | 21.8 | 20 | 18.5 |
| 射胶容量 | 656 cm³ | 780 cm³ | 916 cm³ |
| 射胶重量 (PS) | 597 g | 710 g | 833 g |
| 注射压力 | 221 MPa | 186 MPa | 158 MPa |
| 注射速率 | 210 g/s | 250 g/s | 293 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 3000 kN from different series.
DE290
2900 kN(290t)
All-Electric
6 screw variants
NEO·EII SeriesE320II
3200 kN(320t)
All-Electric
18 screw variants
DE SeriesDE325
3250 kN(325t)
All-Electric
1 screw variants
DE-C SeriesDE328
3280 kN(328t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more