NEO T lite Series T600 - Технически характеристики
T600
Шприц машина с коленчато-лостов механизъм Lite
Преглед на шприц машина NEO T lite Series T600
Tederic NEO T lite Series T600 коленчато-лостова шприц машина със затваряща сила 6000 kN (600 metric tons). This is a mid-range capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (80mm, 85mm, 90mm). Shot weight (PS) ranges from 2040g to 2582g. Injection pressure from 161.5 MPa to 204.4 MPa. Injection rate from 454 g/s to 575 g/s.
Mold opening stroke: 900mm. Tie bar spacing: 880×880mm (width × height). Maximum daylight: 1800mm. Mold height range: 350mm to 900mm.
Overall machine dimensions: 9.3×2.06×2.77 m (L×W×H). Machine weight: 24 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Идеална за формоване на опаковки, домакински уреди и средни технически части.
Затварящ Възел: T600
Инжекционен блок: i4800
Варианти (3)
| Параметър | Вариант A | Вариант B | Вариант C |
|---|---|---|---|
| Диаметър на шнека | 80 mm | 85 mm | 90 mm |
| Съотношение L/D | 23.4 | 22 | 20.8 |
| Обем на впръскване | 2,242 cm³ | 2,531 cm³ | 2,837 cm³ |
| Тегло на впръскване (PS) | 2,040 g | 2,303 g | 2,582 g |
| Налягане на впръскване | 204 MPa | 181 MPa | 162 MPa |
| Скорост на впръскване | 454 g/s | 513 g/s | 575 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 6000 kN from different series.
D600
6000 kN(600t)
Toggle Clamp
3 screw variants
NEO·T SeriesT600
6000 kN(600t)
Toggle Clamp
3 screw variants
J type SeriesDT600/JI24000
6000 kN(600t)
Hydraulic
1 screw variants
J type SeriesDT600/JI24000
6000 kN(600t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more