NEO T lite Series T700 - Технически характеристики
T700
Шприц машина с коленчато-лостов механизъм Lite
Преглед на шприц машина NEO T lite Series T700
Tederic NEO T lite Series T700 коленчато-лостова шприц машина със затваряща сила 7000 kN (700 metric tons). This is a mid-range capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (85mm, 90mm, 100mm). Shot weight (PS) ranges from 2324g to 3216g. Injection pressure from 146.6 MPa to 202.9 MPa. Injection rate from 502 g/s to 695 g/s.
Mold opening stroke: 980mm. Tie bar spacing: 960×960mm (width × height). Maximum daylight: 1930mm. Mold height range: 380mm to 950mm.
Overall machine dimensions: 9.9×2.1×2.6 m (L×W×H). Machine weight: 29 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Идеална за формоване на опаковки, домакински уреди и средни технически части.
Затварящ Възел: T700
Инжекционен блок: i5800
Варианти (3)
| Параметър | Вариант A | Вариант B | Вариант C |
|---|---|---|---|
| Диаметър на шнека | 85 mm | 90 mm | 100 mm |
| Съотношение L/D | 23.3 | 22 | 19.8 |
| Обем на впръскване | 2,554 cm³ | 2,863 cm³ | 3,534 cm³ |
| Тегло на впръскване (PS) | 2,324 g | 2,605 g | 3,216 g |
| Налягане на впръскване | 203 MPa | 181 MPa | 147 MPa |
| Скорост на впръскване | 502 g/s | 563 g/s | 695 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 7000 kN from different series.
D700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO·T SeriesT700
7000 kN(700t)
Toggle Clamp
3 screw variants
J type SeriesDT700/JI24000
7000 kN(700t)
Hydraulic
1 screw variants
J type SeriesDT700/JI24000
7000 kN(700t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more