DE Series DE110 - Technické specifikace
DE110
Plně elektrický vysokorychlostní vstřikovací stroj
Přehled vstřikovacího stroje DE Series DE110
Tederic DE Series DE110 plně elektrický se servopohony vstřikovací stroj s uzavírací silou 1100 kN (110 metric tons). This is a smaller capacity machine within the DE Series series.
This model offers 6 screw diameter options (25mm, 28mm, 28mm, 32mm, 32mm, 35mm). Shot weight (PS) ranges from 54g to 118g. Injection pressure from 167 MPa to 276 MPa. Injection rate from 179 g/s to 350 g/s.
Mold opening stroke: 360mm. Tie bar spacing: 470×420mm (width × height). Maximum daylight: 840mm. Mold height range: 160mm to 480mm.
Overall machine dimensions: 5×1.5×2.2 m (L×W×H). Machine weight: 5 t.
The DE Series series includes 15 models with clamping forces from 400 kN to 8000 kN (40-800 metric tons). A total of 66 injection unit configurations are available in this series.
Ideální pro lisování přesných zdravotnických, elektronických a optických komponentů vyžadujících nejvyšší čistotu.
Uzavírací Jednotka: DE110
Vstřikovací jednotka: e160h/e220h (h = vysoká rychlost)
Varianty (6)
Vstřikovací jednotka: e160h (h = vysoká rychlost)
| Parametr | Varianta A | Varianta B | Varianta C |
|---|---|---|---|
| Průměr šneku | 25 mm | 28 mm | 32 mm |
| Poměr L/D | 22.4 | 20 | 17.5 |
| Objem vstřiku | 59 cm³ | 74 cm³ | 97 cm³ |
| Hmotnost vstřiku (PS) | 54 g | 67 g | 88 g |
| Vstřikovací tlak | 276 MPa | 220 MPa | 168 MPa |
| Dotlak | 221 MPa | 176 MPa | 135 MPa |
| Rychlost vstřikování | 179 g/s | 224 g/s | 293 g/s |
Vstřikovací jednotka: e220h (h = vysoká rychlost)
| Parametr | Varianta A | Varianta B | Varianta C |
|---|---|---|---|
| Průměr šneku | 28 mm | 32 mm | 35 mm |
| Poměr L/D | 23 | 20 | 18.3 |
| Objem vstřiku | 83 cm³ | 109 cm³ | 130 cm³ |
| Hmotnost vstřiku (PS) | 76 g | 99 g | 118 g |
| Vstřikovací tlak | 261 MPa | 200 MPa | 167 MPa |
| Dotlak | 209 MPa | 160 MPa | 134 MPa |
| Rychlost vstřikování | 224 g/s | 293 g/s | 350 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1100 kN from different series.
D100
1000 kN(100t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE120II
1200 kN(120t)
All-Electric
18 screw variants
DT SeriesD130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO·T SeriesT90
900 kN(90t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more