DE Series DE180 - Technické specifikace
DE180
Plně elektrický vysokorychlostní vstřikovací stroj
Přehled vstřikovacího stroje DE Series DE180
Tederic DE Series DE180 plně elektrický se servopohony vstřikovací stroj s uzavírací silou 1800 kN (180 metric tons). This is a smaller capacity machine within the DE Series series.
This model offers 6 screw diameter options (35mm, 38mm, 38mm, 42mm, 42mm, 45mm). Shot weight (PS) ranges from 140g to 261g. Injection pressure from 164 MPa to 244 MPa. Injection rate from 350 g/s to 579 g/s.
Mold opening stroke: 470mm. Tie bar spacing: 580×530mm (width × height). Maximum daylight: 1030mm. Mold height range: 220mm to 560mm.
Overall machine dimensions: 5.8×1.6×2.3 m (L×W×H).
The DE Series series includes 15 models with clamping forces from 400 kN to 8000 kN (40-800 metric tons). A total of 66 injection unit configurations are available in this series.
Ideální pro lisování přesných zdravotnických, elektronických a optických komponentů vyžadujících nejvyšší čistotu.
Uzavírací Jednotka: DE180
Vstřikovací jednotka: e360h/e500h (h = vysoká rychlost)
Varianty (6)
Vstřikovací jednotka: e360h (h = vysoká rychlost)
| Parametr | Varianta A | Varianta B | Varianta C |
|---|---|---|---|
| Průměr šneku | 35 mm | 38 mm | 42 mm |
| Poměr L/D | 21.7 | 20 | 18.1 |
| Objem vstřiku | 154 cm³ | 181 cm³ | 222 cm³ |
| Hmotnost vstřiku (PS) | 140 g | 165 g | 202 g |
| Vstřikovací tlak | 236 MPa | 200 MPa | 164 MPa |
| Dotlak | 189 MPa | 160 MPa | 131 MPa |
| Rychlost vstřikování | 350 g/s | 413 g/s | 504 g/s |
Vstřikovací jednotka: e500h (h = vysoká rychlost)
| Parametr | Varianta A | Varianta B | Varianta C |
|---|---|---|---|
| Průměr šneku | 38 mm | 42 mm | 45 mm |
| Poměr L/D | 22.1 | 20 | 18.7 |
| Objem vstřiku | 204 cm³ | 249 cm³ | 286 cm³ |
| Hmotnost vstřiku (PS) | 186 g | 227 g | 261 g |
| Vstřikovací tlak | 244 MPa | 200 MPa | 174 MPa |
| Dotlak | 195 MPa | 160 MPa | 139 MPa |
| Rychlost vstřikování | 413 g/s | 504 g/s | 579 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1800 kN from different series.
DE168
1680 kN(168t)
All-Electric
9 screw variants
DT SeriesD160
1600 kN(160t)
Toggle Clamp
3 screw variants
DT SeriesD200
2000 kN(200t)
Toggle Clamp
3 screw variants
NEO·T SeriesT160
1600 kN(160t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more