DT Series D1050 - Technické specifikace
Přehled vstřikovacího stroje DT Series D1050
Tederic DT Series D1050 kolenový vstřikovací stroj s uzavírací silou 10500 kN (1050 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (100mm, 110mm, 120mm). Shot weight (PS) ranges from 3931g to 5660g. Injection pressure from 152.9 MPa to 220.2 MPa. Injection rate from 618 g/s to 891 g/s.
Mold opening stroke: 1230mm. Tie bar spacing: 1160×1160mm (width × height). Maximum daylight: 2390mm. Mold height range: 500mm to 1160mm.
Overall machine dimensions: 12×2.6×3 m (L×W×H). Machine weight: 48.2 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
Ideální pro lisování obalů, domácích spotřebičů a středně velkých technických dílů.
Uzavírací Jednotka: D1050
Vstřikovací jednotka: i9500
Standardní / Vysoký výkon
Varianty (3)
| Parametr | Varianta A | Varianta B | Varianta C |
|---|---|---|---|
| Průměr šneku | 100 mm | 110 mm | 120 mm |
| Poměr L/D | 24.2 | 22 | 20.2 |
| Objem vstřiku | 4,320 cm³ | 5,227 cm³ | 6,220 cm³ |
| Hmotnost vstřiku (PS) | 3,931 g | 4,757 g | 5,660 g |
| Vstřikovací tlak | 220 MPa | 182 MPa | 153 MPa |
| Rychlost vstřikování(Standardní / Vysoký výkon) | 618 / 756 g/s | 748 / 915 g/s | 891 / 1089 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 10500 kN from different series.
T1050
10500 kN(1050t)
Toggle Clamp
3 screw variants
J type SeriesDT1050/JI42000
10500 kN(1050t)
Hydraulic
1 screw variants
J type SeriesDT1050/JI42000
10500 kN(1050t)
Hydraulic
1 screw variants
NEO·HII SeriesH1080II
10800 kN(1080t)
Two-Platen
6 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more