DE Series DE140 - Technical Specifications
DE Series DE140 Machine Overview
Tederic DE Series DE140 all-electric servo-driven injection molding machine with a clamping force of 1400 kN (140 metric tons). This is a smaller capacity machine within the DE Series series.
This model offers 6 screw diameter options (28mm, 32mm, 35mm, 35mm, 38mm, 42mm). Shot weight (PS) ranges from 76g to 202g. Injection pressure from 164 MPa to 261 MPa. Injection rate from 224 g/s to 504 g/s.
Mold opening stroke: 420mm. Tie bar spacing: 530×470mm (width × height). Maximum daylight: 950mm. Mold height range: 200mm to 530mm.
Overall machine dimensions: 5.4×1.5×2.2 m (L×W×H). Machine weight: 6.5 t.
The DE Series series includes 15 models with clamping forces from 400 kN to 8000 kN (40-800 metric tons). A total of 66 injection unit configurations are available in this series.
Ideal for precision medical, electronic, and optical components requiring the highest cleanliness.
Clamping Unit: DE140
Injection Unit: e220h/e360h (h = high speed)
Variants (6)
Injection Unit: e220h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 28 mm | 32 mm | 35 mm |
| L/D Ratio | 23 | 20 | 18.3 |
| Shot Volume | 83 cm³ | 109 cm³ | 130 cm³ |
| Shot Weight (PS) | 76 g | 99 g | 118 g |
| Injection Pressure | 261 MPa | 200 MPa | 167 MPa |
| Holding Pressure | 209 MPa | 160 MPa | 134 MPa |
| Injection Rate | 224 g/s | 293 g/s | 350 g/s |
Injection Unit: e360h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 35 mm | 38 mm | 42 mm |
| L/D Ratio | 21.7 | 20 | 18.1 |
| Shot Volume | 154 cm³ | 181 cm³ | 222 cm³ |
| Shot Weight (PS) | 140 g | 165 g | 202 g |
| Injection Pressure | 236 MPa | 200 MPa | 164 MPa |
| Holding Pressure | 189 MPa | 160 MPa | 131 MPa |
| Injection Rate | 350 g/s | 413 g/s | 504 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1400 kN from different series.
D130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO·T SeriesT130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT130
1300 kN(130t)
Toggle Clamp
3 screw variants
DT SeriesD160
1600 kN(160t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more