DE Series DE290 - Technical Specifications
DE Series DE290 Machine Overview
Tederic DE Series DE290 all-electric servo-driven injection molding machine with a clamping force of 2900 kN (290 metric tons). This is a smaller capacity machine within the DE Series series.
This model offers 6 screw diameter options (42mm, 45mm, 45mm, 50mm, 50mm, 55mm). Shot weight (PS) ranges from 246g to 465g. Injection pressure from 162 MPa to 247 MPa. Injection rate from 434 g/s to 715 g/s.
Mold opening stroke: 610mm. Tie bar spacing: 720×720mm (width × height). Maximum daylight: 1290mm. Mold height range: 250mm to 680mm.
Overall machine dimensions: 6.8×1.9×2.5 m (L×W×H).
The DE Series series includes 15 models with clamping forces from 400 kN to 8000 kN (40-800 metric tons). A total of 66 injection unit configurations are available in this series.
Ideal for precision medical, electronic, and optical components requiring the highest cleanliness.
Clamping Unit: DE290
Injection Unit: e620h/e840h (h = high speed)
Variants (6)
Injection Unit: e620h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 42 mm | 45 mm | 50 mm |
| L/D Ratio | 21.4 | 20 | 18 |
| Shot Volume | 270 cm³ | 310 cm³ | 383 cm³ |
| Shot Weight (PS) | 246 g | 282 g | 348 g |
| Injection Pressure | 230 MPa | 200 MPa | 162 MPa |
| Holding Pressure | 184 MPa | 160 MPa | 130 MPa |
| Injection Rate | 504 g/s | 579 g/s | 715 g/s |
Injection Unit: e840h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 45 mm | 50 mm | 55 mm |
| L/D Ratio | 22.2 | 20 | 18.2 |
| Shot Volume | 342 cm³ | 422 cm³ | 511 cm³ |
| Shot Weight (PS) | 311 g | 384 g | 465 g |
| Injection Pressure | 247 MPa | 200 MPa | 165 MPa |
| Holding Pressure | 198 MPa | 160 MPa | 132 MPa |
| Injection Rate | 434 g/s | 536 g/s | 649 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2900 kN from different series.
T300
3000 kN(300t)
Toggle Clamp
3 screw variants
NEO·T SeriesT260
2600 kN(260t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE260II
2600 kN(260t)
All-Electric
18 screw variants
NEO·EII SeriesE320II
3200 kN(320t)
All-Electric
18 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more