DE Series DE85 - Technical Specifications
DE Series DE85 Machine Overview
Tederic DE Series DE85 all-electric servo-driven injection molding machine with a clamping force of 850 kN (85 metric tons). This is a smaller capacity machine within the DE Series series.
This model offers 6 screw diameter options (22mm, 25mm, 25mm, 28mm, 28mm, 32mm). Shot weight (PS) ranges from 36g to 88g. Injection pressure from 168 MPa to 284 MPa. Injection rate from 138 g/s to 293 g/s.
Mold opening stroke: 320mm. Tie bar spacing: 420×360mm (width × height). Maximum daylight: 730mm. Mold height range: 150mm to 410mm.
Overall machine dimensions: 4.5×1.4×2 m (L×W×H). Machine weight: 4.1 t.
The DE Series series includes 15 models with clamping forces from 400 kN to 8000 kN (40-800 metric tons). A total of 66 injection unit configurations are available in this series.
Ideal for precision medical, electronic, and optical components requiring the highest cleanliness.
Clamping Unit: DE85
Injection Unit: e110h/e160h (h = high speed)
Variants (6)
Injection Unit: e110h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 22 mm | 25 mm | 28 mm |
| L/D Ratio | 22.7 | 20 | 17.9 |
| Shot Volume | 40 cm³ | 52 cm³ | 65 cm³ |
| Shot Weight (PS) | 36 g | 47 g | 59 g |
| Injection Pressure | 284 MPa | 220 MPa | 175 MPa |
| Holding Pressure | 227 MPa | 176 MPa | 140 MPa |
| Injection Rate | 138 g/s | 179 g/s | 224 g/s |
Injection Unit: e160h (h = high speed)
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 25 mm | 28 mm | 32 mm |
| L/D Ratio | 22.4 | 20 | 17.5 |
| Shot Volume | 59 cm³ | 74 cm³ | 97 cm³ |
| Shot Weight (PS) | 54 g | 67 g | 88 g |
| Injection Pressure | 276 MPa | 220 MPa | 168 MPa |
| Holding Pressure | 221 MPa | 176 MPa | 135 MPa |
| Injection Rate | 179 g/s | 224 g/s | 293 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 850 kN from different series.
T90
900 kN(90t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE90II
900 kN(90t)
All-Electric
18 screw variants
NEO T lite SeriesT90
900 kN(90t)
Toggle Clamp
3 screw variants
DT SeriesD100
1000 kN(100t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more