TEDESolutions
NEO·T Series T700 - Technical Specifications
December 13, 2025
TEDESolutions sp. z o.o. | ul. Stolarska 6C, 86-021 Maksymilianowo | +48 507 161 780 | biuro@tedesolutions.pl | www.tedesolutions.pl
7,000
kN
3
Variants
29
t
NEO·T Series T700 Machine Overview
Tederic NEO·T Series T700 toggle clamp injection molding machine with a clamping force of 7000 kN (700 metric tons). This is a mid-range capacity machine within the NEO·T Series series.
This model offers 3 screw diameter options (85mm, 90mm, 100mm). Shot weight (PS) ranges from 2442g to 3381g. Injection pressure from 146.6 MPa to 202.9 MPa. Injection rate from 552 g/s to 764 g/s.
Mold opening stroke: 980mm. Tie bar spacing: 960×960mm (width × height). Maximum daylight: 1930mm. Mold height range: 380mm to 950mm.
Overall machine dimensions: 10×2.19×2.87 m (L×W×H). Machine weight: 29 t.
The NEO·T Series series includes 12 models with clamping forces from 900 kN to 10500 kN (90-1050 metric tons). A total of 36 injection unit configurations are available in this series.
Ideal for packaging, household appliances, and medium-sized technical parts molding.
Clamping Unit: T700
Clamping Force
7,000 kN
Mold Opening Stroke
980 mm
Max Mold Height
950 mm
Min Mold Height
380 mm
Tie Bar Spacing
960 × 960 mm
Platen Dimensions (W×H)
1410 × 1410 mm
Min. Mold Dimensions
672 × 672 mm
Max Daylight
1,930 mm
Ejector Stroke
260 mm
Ejector Force
182 kN
Ejector Pins
21
Machine Weight
29.0 t
Overall Dimensions (L×W×H)
10 × 2.19 × 2.87 m
Injection Unit: i5800
Max Injection Speed
107 mm/s
Injection Stroke
473 mm
Screw Speed
126 rpm
Max Pump Pressure
17.5 MPa
Pump Motor Power
51+32 kW
Heater Power
44 kW
Hopper Capacity
100 kg
Oil Tank Volume
800 L
Variants (3)
Injection Unit: i5800
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 85 mm | 90 mm | 100 mm |
| L/D Ratio | 23.3 | 22 | 19.8 |
| Shot Volume | 2,684 cm³ | 3,009 cm³ | 3,715 cm³ |
| Shot Weight (PS) | 2,442 g | 2,738 g | 3,381 g |
| Injection Pressure | 203 MPa | 181 MPa | 147 MPa |
| Injection Rate | 552 g/s | 619 g/s | 764 g/s |
Equipment & Options
Standard
Optional
—Not Available
High rigidity 5 points-double toggle structure
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
Locating ring on moving platen
Standard
Mechanical safety
Standard
Electrical safety
Standard
Hydraulic safety
Standard
Fix-quantity type auto central lubrication system
Standard
Low pressure mold protection
Standard
One button automatic mold adjustment
Standard
Self-lock mold adjust motor
Standard
Compulsory ejector-back function
Standard
Quick change of central eject pin
Standard
Transducer on moving platen
Standard
Adjustable supporting feet for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
EUROMAP 18 robot interface
Standard
Mechanical position limitation for moving platen
Optional
Fast connecting water regulator
Standard
2 groups of core pulling valve
Standard
2 groups of air blaster valve
Standard
Glass water flow regulators
Optional
Proportional mold open/close valve
Optional
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Optional
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Double stage linear guide injection structure
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Proportional injection valve
Optional
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Cold start protection
Standard
Material self-cleaning function
Standard
Temperature monitor for feeding throat
Optional
Feeding throat temperature close loop control
Optional
Barrel overheating protection
Standard
Nozzle cover
Standard
Self-lock valve for carriage
Standard
Barrel supporting device
Standard
Swivel injection unit
Standard
Material loading platform
Optional
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Optional
Mica heating band
Standard
Ceramic heating band
Optional
Nano infrared heating band
Optional
Wheel sliding hopper
Standard
Stainless hopper
Standard
Equipment & Options
Standard
Optional
—Not Available
Clamping Unit(23)
High rigidity 5 points-double toggle structure
Standard
Platen with T slots
Standard
Platen (according to EUROMAP 2)
Optional
Locating ring on moving platen
Standard
Mechanical safety
Standard
Electrical safety
Standard
Hydraulic safety
Standard
Fix-quantity type auto central lubrication system
Standard
Low pressure mold protection
Standard
One button automatic mold adjustment
Standard
Self-lock mold adjust motor
Standard
Compulsory ejector-back function
Standard
Quick change of central eject pin
Standard
Transducer on moving platen
Standard
Adjustable supporting feet for moving platen
Standard
High rigidity steel wear strips for moving platen
Standard
EUROMAP 18 robot interface
Standard
Mechanical position limitation for moving platen
Optional
Fast connecting water regulator
Standard
2 groups of core pulling valve
Standard
2 groups of air blaster valve
Standard
Glass water flow regulators
Optional
Proportional mold open/close valve
Optional
Injection Unit(29)
Standard screw
Standard
Specialized screw and barrel
Optional
Shut off nozzle
Optional
Double cylinder injection
Standard
Double carriage cylinder injection unit
Standard
Double stage linear guide injection structure
Standard
Carriage transducer
Standard
Screw rotation speed display
Standard
Proportional injection valve
Optional
Hydraulic plasticizing
Standard
Electrical plasticizing
Optional
Proportional back pressure control
Standard
Cold start protection
Standard
Material self-cleaning function
Standard
Temperature monitor for feeding throat
Optional
Feeding throat temperature close loop control
Optional
Barrel overheating protection
Standard
Nozzle cover
Standard
Self-lock valve for carriage
Standard
Barrel supporting device
Standard
Swivel injection unit
Standard
Material loading platform
Optional
Manual central lubricating device for carriage
Standard
Carriage central auto lubrication device
Optional
Mica heating band
Standard
Ceramic heating band
Optional
Nano infrared heating band
Optional
Wheel sliding hopper
Standard
Stainless hopper
Standard
Electrical System(22)
Techmation controller
Standard
KEBA controller
Optional
All action instant monitoring
Standard
Production monitoring
Standard
Failure alarm display
Standard
Changeover from injection fill to hold by injection pressure
Standard
I/O monitoring display
Standard
3 color light (with buzzer)
Standard
Motor overload protection
Standard
Front/back door emergency stop switch
Standard
5 pins socket of 380V/16A, 1 group
Standard
3 pins socket of 230V/16A, 1 group
Standard
Transformer for servomotor system
Optional
EUROMAP 12 robot interface
Optional
EUROMAP 67 robot interface
Optional
EUROMAP 13 neutron connection
Optional
Double protection for heating
Standard
Safety relay monitoring
Standard
SSR heating control
Standard
Network centralized control system
Optional
Instant power consumption monitoring
Optional
Instant clamping force monitoring
Optional
Hydraulic System(20)
Fast response servo system
Standard
Increased motor-pump unit
Optional
Bi-pass oil filter
Standard
Hydraulic safety device
Standard
Carriage self-lock valve
Standard
Self-lock mold adjust motor
Standard
Mold open shock mitigation
Standard
Injections respond quickly
Standard
Programmable injection sequence
Optional
Cooling water valve
Optional
Non-welding hydraulic pipe
Standard
Temperature monitoring
Standard
Oil level alarm
Standard
Self-lock suction oil filter
Standard
Protective link for hoses
Standard
Proportional injection valve
Standard
Injection servo valve
Optional
Proportional mold open/close valve
Standard
2 groups of core pulling valve
Standard
2 groups of air blaster valve
Standard
Other Equipment(12)
Standard tederic color
Standard
Leveling pad
Standard
Spare parts, regular tools, mold clamper, extended nozzle, operation manual
Standard
Robot
Standard
Magnetic grate
Optional
Chiller
Optional
Mould temp controller
Optional
Dehumidifier
Optional
Autoloader
Optional
Fumigated wooden packaging
Optional
With full-tank hydraulic oil
Standard
Products fetching platform
Optional
Similar Machines by Clamping Force
Other Tederic models with clamping force around 7000 kN from different series.
DT Series
D700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT700
7000 kN(700t)
Toggle Clamp
3 screw variants
J type SeriesDT700/JI24000
7000 kN(700t)
Hydraulic
1 screw variants
J type SeriesDT700/JI24000
7000 kN(700t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more