DT Series D2400 - Műszaki adatok
DT Series D2400 fröccsöntő gép áttekintése
Tederic DT Series D2400 térdkaros fröccsöntő gép záróerővel 24000 kN (2400 metric tons). This is a mid-range capacity machine within the DT Series series.
This model offers 4 screw diameter options (140mm, 150mm, 160mm, 170mm). Shot weight (PS) ranges from 9624g to 14190g. Injection pressure from 146.5 MPa to 216 MPa. Injection rate from 1131 g/s to 1668 g/s.
Mold opening stroke: 1900mm. Tie bar spacing: 1850×1620mm (width × height). Maximum daylight: 3700mm. Mold height range: 500mm to 1800mm.
Overall machine dimensions: 16.8×4.02×4.84 m (L×W×H). Machine weight: 157 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
Ideális csomagolás, háztartási készülékek és közepes méretű műszaki alkatrészek öntése.
Záróegység: D2400
Fröccsöntő egység: i22300
Változatok (4)
| Paraméter | Változat A | Változat B | Változat C | Változat D |
|---|---|---|---|---|
| Csigaátmérő | 140 mm | 150 mm | 160 mm | 170 mm |
| L/D arány | 23.6 | 22 | 20.6 | 19.4 |
| Lövéstérfogat | 10,576 cm³ | 12,140 cm³ | 13,813 cm³ | 15,594 cm³ |
| Lövéstömeg (PS) | 9,624 g | 11,048 g | 12,570 g | 14,190 g |
| Fröccsöntési nyomás | 216 MPa | 188 MPa | 165 MPa | 147 MPa |
| Fröccsöntési sebesség | 1131 g/s | 1298 g/s | 1478 g/s | 1668 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 24000 kN from different series.
H2400II
24000 kN(2400t)
Two-Platen
8 screw variants
NEO·M SeriesM2320v
23200 kN(2320t)
Multi-Component
2 screw variants
J type SeriesH2300/JI100000
23000 kN(2300t)
Hydraulic
1 screw variants
J type SeriesH2700/JI130000
27000 kN(2700t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more