NEO T lite Series T130 - Műszaki adatok
NEO T lite Series T130 fröccsöntő gép áttekintése
Tederic NEO T lite Series T130 térdkaros fröccsöntő gép záróerővel 1300 kN (130 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (38mm, 42mm, 45mm). Shot weight (PS) ranges from 201g to 282g. Injection pressure from 165.9 MPa to 232.7 MPa. Injection rate from 104 g/s to 146 g/s.
Mold opening stroke: 360mm. Tie bar spacing: 410×410mm (width × height). Maximum daylight: 810mm. Mold height range: 150mm to 450mm.
Overall machine dimensions: 4.66×1.45×2.07 m (L×W×H). Machine weight: 4.4 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideális csomagolás, háztartási készülékek és közepes méretű műszaki alkatrészek öntése.
Záróegység: T130
Fröccsöntő egység: i510
Változatok (3)
| Paraméter | Változat A | Változat B | Változat C |
|---|---|---|---|
| Csigaátmérő | 38 mm | 42 mm | 45 mm |
| L/D arány | 22.1 | 20 | 18.7 |
| Lövéstérfogat | 221 cm³ | 270 cm³ | 310 cm³ |
| Lövéstömeg (PS) | 201 g | 246 g | 282 g |
| Fröccsöntési nyomás | 233 MPa | 191 MPa | 166 MPa |
| Fröccsöntési sebesség | 104 g/s | 127 g/s | 146 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1300 kN from different series.
D130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO·T SeriesT130
1300 kN(130t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE120II
1200 kN(120t)
All-Electric
18 screw variants
DE SeriesDE140
1400 kN(140t)
All-Electric
6 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more