NEO T lite Series T260 - Műszaki adatok
NEO T lite Series T260 fröccsöntő gép áttekintése
Tederic NEO T lite Series T260 térdkaros fröccsöntő gép záróerővel 2600 kN (260 metric tons). This is a smaller capacity machine within the NEO T lite Series series.
This model offers 3 screw diameter options (55mm, 60mm, 65mm). Shot weight (PS) ranges from 597g to 833g. Injection pressure from 158.4 MPa to 221.3 MPa. Injection rate from 210 g/s to 293 g/s.
Mold opening stroke: 550mm. Tie bar spacing: 610×570mm (width × height). Maximum daylight: 1150mm. Mold height range: 220mm to 600mm.
Overall machine dimensions: 5.45×1.73×2.2 m (L×W×H). Machine weight: 8.4 t.
The NEO T lite Series series includes 16 models with clamping forces from 900 kN to 10000 kN (90-1000 metric tons). A total of 48 injection unit configurations are available in this series.
Ideális csomagolás, háztartási készülékek és közepes méretű műszaki alkatrészek öntése.
Záróegység: T260
Fröccsöntő egység: i1500
Változatok (3)
| Paraméter | Változat A | Változat B | Változat C |
|---|---|---|---|
| Csigaátmérő | 55 mm | 60 mm | 65 mm |
| L/D arány | 21.8 | 20 | 18.5 |
| Lövéstérfogat | 656 cm³ | 780 cm³ | 916 cm³ |
| Lövéstömeg (PS) | 597 g | 710 g | 833 g |
| Fröccsöntési nyomás | 221 MPa | 186 MPa | 158 MPa |
| Fröccsöntési sebesség | 210 g/s | 250 g/s | 293 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2600 kN from different series.
T260
2600 kN(260t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE260II
2600 kN(260t)
All-Electric
18 screw variants
DE-C SeriesDE258
2580 kN(258t)
All-Electric
9 screw variants
DE SeriesDE265
2650 kN(265t)
All-Electric
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more