DT Series D160 - Specificații tehnice
Prezentare generală DT Series D160
Tederic DT Series D160 cu genunchi mașină de turnare prin injecție cu o forță de închidere de 1600 kN (160 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (42mm, 45mm, 50mm). Shot weight (PS) ranges from 261g to 370g. Injection pressure from 150 MPa to 213 MPa. Injection rate from 142 g/s to 202 g/s.
Mold opening stroke: 480mm. Tie bar spacing: 470×470mm (width × height). Maximum daylight: 1010mm. Mold height range: 200mm to 530mm.
Overall machine dimensions: 5.03×1.46×2.06 m (L×W×H). Machine weight: 5.3 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
Ideală pentru turnare ambalaje, electrocasnice și piese tehnice de dimensiuni medii.
Unitate de Închidere: D160
Unitate de injecție: i600
Standard / Putere mare
Variante (3)
| Parametru | Variantă A | Variantă B | Variantă C |
|---|---|---|---|
| Diametrul șnecului | 42 mm | 45 mm | 50 mm |
| Raport L/D | 21.4 | 20 | 18 |
| Volum injecție | 287 cm³ | 329 cm³ | 406 cm³ |
| Greutate injecție (PS) | 261 g | 300 g | 370 g |
| Presiune injecție | 213 MPa | 185 MPa | 150 MPa |
| Rată de injecție | 142 g/s | 163 g/s | 202 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 1600 kN from different series.
T160
1600 kN(160t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE160II
1600 kN(160t)
All-Electric
18 screw variants
NEO T lite SeriesT160
1600 kN(160t)
Toggle Clamp
3 screw variants
DE-C SeriesDE168
1680 kN(168t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more