DT Series D1800 - 技术规格
DT Series D1800 机器概述
Tederic DT Series D1800 肘杆式 注塑机 锁模力为 18000 kN (1800 metric tons). This is a mid-range capacity machine within the DT Series series.
This model offers 3 screw diameter options (130mm, 140mm, 150mm). Shot weight (PS) ranges from 7718g to 10276g. Injection pressure from 143.1 MPa to 190.5 MPa. Injection rate from 1032 g/s to 1375 g/s.
Mold opening stroke: 1700mm. Tie bar spacing: 1660×1520mm (width × height). Maximum daylight: 3260mm. Mold height range: 500mm to 1560mm.
Overall machine dimensions: 15.9×3.59×4.62 m (L×W×H). Machine weight: 128 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D1800
注射单元: i15800
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 130 mm | 140 mm | 150 mm |
| 长径比 | 23.7 | 22 | 20.5 |
| 射胶容量 | 8,482 cm³ | 9,837 cm³ | 11,292 cm³ |
| 射胶重量 (PS) | 7,718 g | 8,951 g | 10,276 g |
| 注射压力 | 191 MPa | 164 MPa | 143 MPa |
| 注射速率 | 1032 g/s | 1197 g/s | 1375 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 18000 kN from different series.
DT1800/JI75000
18000 kN(1800t)
Hydraulic
1 screw variants
J type SeriesDT1800/JI75000
18000 kN(1800t)
Hydraulic
1 screw variants
NEO·M SeriesM1720v
17200 kN(1720t)
Multi-Component
4 screw variants
NEO·HII SeriesH1700II
17000 kN(1700t)
Two-Platen
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more