NEO·HII Series H1700II - 技术规格
NEO·HII Series H1700II 机器概述
Tederic NEO·HII Series H1700II 二板式 注塑机 锁模力为 17000 kN (1700 metric tons). This is a smaller capacity machine within the NEO·HII Series series.
This model offers 3 screw diameter options (130mm, 140mm, 150mm). Shot weight (PS) ranges from 7718g to 10276g. Injection pressure from 143.1 MPa to 190.5 MPa. Injection rate from 1192 g/s to 1587 g/s.
Mold opening stroke: 2550mm. Tie bar spacing: 1570×1380mm (width × height). Maximum daylight: 3250mm. Mold height range: 700mm to 1600mm.
The NEO·HII Series series includes 15 models with clamping forces from 5500 kN to 45000 kN (550-4500 metric tons). A total of 89 injection unit configurations are available in this series.
非常适合 大型汽车零件、工业包装和建筑组件成型.
合模单元: H1700II
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 130 mm | 140 mm | 150 mm |
| 长径比 | 23.7 | 22 | 20.5 |
| 射胶容量 | 8,482 cm³ | 9,837 cm³ | 11,292 cm³ |
| 射胶重量 (PS) | 7,718 g | 8,951 g | 10,276 g |
| 注射压力 | 191 MPa | 164 MPa | 143 MPa |
| 注射速率 | 1192 g/s | 1382 g/s | 1587 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 17000 kN from different series.
M1720v
17200 kN(1720t)
Multi-Component
4 screw variants
DT SeriesD1800
18000 kN(1800t)
Toggle Clamp
3 screw variants
J type SeriesDT1800/JI75000
18000 kN(1800t)
Hydraulic
1 screw variants
J type SeriesDT1800/JI75000
18000 kN(1800t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read moreInjection Molds & Precision Molding
Mold design principles and precision molding techniques for high-quality parts.
Read more