DT Series D200 - 技术规格
DT Series D200 机器概述
Tederic DT Series D200 肘杆式 注塑机 锁模力为 2000 kN (200 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (45mm, 50mm, 55mm). Shot weight (PS) ranges from 326g to 486g. Injection pressure from 159 MPa to 238 MPa. Injection rate from 127 g/s to 190 g/s.
Mold opening stroke: 540mm. Tie bar spacing: 530×530mm (width × height). Maximum daylight: 1100mm. Mold height range: 220mm to 560mm.
Overall machine dimensions: 5.49×1.57×2.12 m (L×W×H). Machine weight: 6.8 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D200
注射单元: i850
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 45 mm | 50 mm | 55 mm |
| 长径比 | 22.2 | 20 | 18.2 |
| 射胶容量 | 358 cm³ | 442 cm³ | 535 cm³ |
| 射胶重量 (PS) | 326 g | 402 g | 486 g |
| 注射压力 | 238 MPa | 193 MPa | 159 MPa |
| 注射速率(标准 / 高功率) | 127 / 159 g/s | 157 / 196 g/s | 190 / 237 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2000 kN from different series.
T200
2000 kN(200t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE200II
2000 kN(200t)
All-Electric
18 screw variants
NEO T lite SeriesT200
2000 kN(200t)
Toggle Clamp
3 screw variants
DE-C SeriesDE208
2080 kN(208t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more