NEO·T Series T200 - 技术规格
NEO·T Series T200 机器概述
Tederic NEO·T Series T200 肘杆式 注塑机 锁模力为 2000 kN (200 metric tons). This is a smaller capacity machine within the NEO·T Series series.
This model offers 3 screw diameter options (45mm, 50mm, 55mm). Shot weight (PS) ranges from 340g to 508g. Injection pressure from 153.9 MPa to 229.9 MPa. Injection rate from 165 g/s to 246 g/s.
Mold opening stroke: 510mm. Tie bar spacing: 530×530mm (width × height). Maximum daylight: 1070mm. Mold height range: 200mm to 560mm.
Overall machine dimensions: 5.26×1.68×2.17 m (L×W×H). Machine weight: 7.2 t.
The NEO·T Series series includes 12 models with clamping forces from 900 kN to 10500 kN (90-1050 metric tons). A total of 36 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: T200
注射单元: i850
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 45 mm | 50 mm | 55 mm |
| 长径比 | 22.2 | 20 | 18.2 |
| 射胶容量 | 374 cm³ | 461 cm³ | 558 cm³ |
| 射胶重量 (PS) | 340 g | 420 g | 508 g |
| 注射压力 | 230 MPa | 186 MPa | 154 MPa |
| 注射速率 | 165 g/s | 204 g/s | 246 g/s |
设备与选项
设备与选项
Similar Machines by Clamping Force
Other Tederic models with clamping force around 2000 kN from different series.
D200
2000 kN(200t)
Toggle Clamp
3 screw variants
NEO·EII SeriesE200II
2000 kN(200t)
All-Electric
18 screw variants
NEO T lite SeriesT200
2000 kN(200t)
Toggle Clamp
3 screw variants
DE-C SeriesDE208
2080 kN(208t)
All-Electric
9 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more