DT Series D700 - 技术规格
DT Series D700 机器概述
Tederic DT Series D700 肘杆式 注塑机 锁模力为 7000 kN (700 metric tons). This is a smaller capacity machine within the DT Series series.
This model offers 3 screw diameter options (85mm, 90mm, 100mm). Shot weight (PS) ranges from 2442g to 3381g. Injection pressure from 156.8 MPa to 217 MPa. Injection rate from 469 g/s to 650 g/s.
Mold opening stroke: 980mm. Tie bar spacing: 960×960mm (width × height). Maximum daylight: 1960mm. Mold height range: 400mm to 980mm.
Overall machine dimensions: 10.18×2.13×2.79 m (L×W×H). Machine weight: 29 t.
The DT Series series includes 19 models with clamping forces from 1000 kN to 40000 kN (100-4000 metric tons). A total of 59 injection unit configurations are available in this series.
非常适合 包装、家用电器和中型技术零件成型.
合模单元: D700
注射单元: i5800
标准 / 高功率
变体 (3)
| 参数 | 变体 A | 变体 B | 变体 C |
|---|---|---|---|
| 螺杆直径 | 85 mm | 90 mm | 100 mm |
| 长径比 | 23.3 | 22 | 19.8 |
| 射胶容量 | 2,684 cm³ | 3,009 cm³ | 3,715 cm³ |
| 射胶重量 (PS) | 2,442 g | 2,738 g | 3,381 g |
| 注射压力 | 217 MPa | 194 MPa | 157 MPa |
| 注射速率(标准 / 高功率) | 469 / 558 g/s | 526 / 625 g/s | 650 / 772 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 7000 kN from different series.
T700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT700
7000 kN(700t)
Toggle Clamp
3 screw variants
J type SeriesDT700/JI24000
7000 kN(700t)
Hydraulic
1 screw variants
J type SeriesDT700/JI24000
7000 kN(700t)
Hydraulic
1 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreProduction Cycle Optimization
Strategies to improve efficiency and reduce cycle times in injection molding.
Read moreInjection Molding Defects: Identification & Solutions
Common defects, their causes, and practical solutions for quality improvement.
Read more