J type Series DT700/JI24000 - 技术规格
J type Series DT700/JI24000 机器概述
Tederic J type Series DT700/JI24000 液压式 注塑机 锁模力为 7000 kN (700 metric tons). This is a smaller capacity machine within the J type Series series.
This model offers 1 screw diameter options (100mm). Shot weight (PS) ranges from 21515g to 21515g. Injection pressure from 82 MPa to 82 MPa. Injection rate from 912 g/s to 912 g/s.
Mold opening stroke: 980mm. Tie bar spacing: 960×960mm (width × height). Maximum daylight: 1960mm. Mold height range: 400mm to 980mm.
Overall machine dimensions: 10×3.3×3.7 m (L×W×H).
The J type Series series includes 24 models with clamping forces from 4000 kN to 45000 kN (400-4500 metric tons). A total of 24 injection unit configurations are available in this series.
非常适合 需要高锁模力的重型工业组件和零件成型.
合模单元: DT700/JI24000
注射单元: JI24000
变体 (1)
| 参数 | 变体 A |
|---|---|
| 螺杆直径 | 100 mm |
| 柱塞直径 | 190 mm |
| 长径比 | 30 |
| 射胶容量 | 29,472 cm³ |
| 射胶重量 (PS) | 21,515 g |
| 注射压力 | 82 MPa |
| 注射速率 | 912 g/s |
Similar Machines by Clamping Force
Other Tederic models with clamping force around 7000 kN from different series.
D700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO·T SeriesT700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO·HII SeriesH710II
7100 kN(710t)
Two-Platen
6 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Complete Guide to Injection Molding Machines
Comprehensive overview of machine types, selection criteria, and key specifications.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read morePredictive Maintenance for Injection Machines
Modern maintenance strategies to maximize uptime and machine longevity.
Read more