NEO·EII Series E670II - Technical Specifications
NEO·EII Series E670II Machine Overview
Tederic NEO·EII Series E670II all-electric servo-driven injection molding machine with a clamping force of 6700 kN (670 metric tons). This is a mid-range capacity machine within the NEO·EII Series series.
This model offers 9 screw diameter options (65mm, 70mm, 70mm, 80mm, 80mm, 80mm, 90mm, 90mm, 100mm). Shot weight (PS) ranges from 981g to 3216g. Injection pressure from 142 MPa to 242 MPa. Injection rate from 483 g/s to 1144 g/s.
Mold opening stroke: 1000mm. Tie bar spacing: 1160×1080mm (width × height). Maximum daylight: 2000mm. Mold height range: 420mm to 1000mm.
Overall machine dimensions: 9.9×2.8×2.5 m (L×W×H). Machine weight: 43 t.
The NEO·EII Series series includes 14 models with clamping forces from 600 kN to 14000 kN (60-1400 metric tons). A total of 210 injection unit configurations are available in this series.
Ideal for precision medical, electronic, and optical components requiring the highest cleanliness.
Clamping Unit: E670II
Injection Unit: e2300/e3400/e5300
Variants (9)
Injection Unit: e2300
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 65 mm | 70 mm | 80 mm |
| L/D Ratio | 21.5 | 20 | 17.5 |
| Shot Volume | 1,078 cm³ | 1,251 cm³ | 1,634 cm³ |
| Shot Weight (PS) | 981 g | 1,138 g | 1,487 g |
| Injection Pressure | 215 MPa | 185 MPa | 142 MPa |
| Holding Pressure | 172 MPa | 148 MPa | 114 MPa |
| Injection Rate | 483 g/s | 560 g/s | 732 g/s |
Injection Unit: e3400
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 70 mm | 80 mm | 90 mm |
| L/D Ratio | 22.9 | 20 | 17.8 |
| Shot Volume | 1,424 cm³ | 1,860 cm³ | 2,354 cm³ |
| Shot Weight (PS) | 1,296 g | 1,693 g | 2,142 g |
| Injection Pressure | 242 MPa | 185 MPa | 146 MPa |
| Holding Pressure | 194 MPa | 148 MPa | 117 MPa |
| Injection Rate | 560 g/s | 732 g/s | 926 g/s |
Injection Unit: e5300
| Parameter | Variant A | Variant B | Variant C |
|---|---|---|---|
| Screw Diameter | 80 mm | 90 mm | 100 mm |
| L/D Ratio | 24.8 | 22 | 19.8 |
| Shot Volume | 2,262 cm³ | 2,863 cm³ | 3,534 cm³ |
| Shot Weight (PS) | 2,058 g | 2,605 g | 3,216 g |
| Injection Pressure | 234 MPa | 185 MPa | 150 MPa |
| Holding Pressure | 187 MPa | 148 MPa | 120 MPa |
| Injection Rate | 732 g/s | 926 g/s | 1144 g/s |
Equipment & Options
Equipment & Options
Similar Machines by Clamping Force
Other Tederic models with clamping force around 6700 kN from different series.
T650
6500 kN(650t)
Toggle Clamp
3 screw variants
DT SeriesD700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO·T SeriesT700
7000 kN(700t)
Toggle Clamp
3 screw variants
NEO T lite SeriesT700
7000 kN(700t)
Toggle Clamp
3 screw variants
Compare machines from different series to find the best fit for your needs.
Related Articles
Learn more about injection molding technology and best practices.
Micro-Injection Molding for Medical Components
Specialized techniques for producing precision medical microcomponents.
Read moreAutomation & Industry 4.0 in Injection Molding
Smart factory integration, automation systems, and digital transformation.
Read moreTCO & Energy Efficiency in Injection Molding
Total cost of ownership analysis and energy-saving strategies for modern machines.
Read more